Mica Bands Heaters

A mica core produces a thin, efficient heater. Heat from the precisely wound Nichrome element is quickly transferred to the working surface for fast heat-up and response. Mica provides excellent dielectric strength and heat transfer capability for long heater life. The mica core is encased in a continuous corrosion resistant sheath and formed. All full mica band heaters are designed with closed ends to protect against contamination. Maximum sheath temperature is 800 F.

TERMINATIONS:

	Fig. 1: Usual design for nozzle heating applications. 12" leads are standard.		Fig. 6: Flexible armor cable is the best solution to lead abrasion problems. 12" armor with 14" overall length leads are standard. Specify alternate position.
	Fig. 3: Single conductor metal braid over lead wire. Offers most practical solution to abrasion problem. 12" braid with 14" overall length leads are standard.		Fig. 7: Double conductor metal braid exiting from edge 180° from gap.
	Fig. 4: Standard lead wires exiting 180° from gap.		Fig. 16: Double conductor metal braid over lead wires at same position as Fig. 5. 12" braid with 14" overall length leads are standard. Specify alternate position.
	Fig. 5: Leads exit at right angle to sheath 5/8" from gap. 12" lead wire in 3" long sleeving is standard. Specify alternate position.

Mighty-Tuff | Ceramic | Mica Bands

Send mail to Sales@elpasoheater.com with questions or comments about this web site.
Copyright © 2005 El Paso Heater & Supply Company
Last modified: 08/24/11

Design: TS COMPUTERS AND WEBDESIGN