Mechanical | Solid State | Mercury

 

Home Up Site Map About Us Español What's New WebMail Contact Us

 


                           

 

 

 

SOLID STATE RELAYS

     The very fast cycle time and electronic switching performed by AM Series Solid State Relays can significantly extend the life of electric heaters. Thermal expansion and contraction of the element is reduced because temperatures are typically more stable about the set point. This phenomenon is "Metal Fatigue" and is generally the "wearing out" process of electric heaters. In all applications using any type of relay device, a high limit control and contactor is recommended for protection. Proper heat sink is required as indicated. AM Series Solid State Relays are also available for switching 3 phase loads up to 55 amps. A built-in LED indicates power to the load.

 

SV Series Panel Mounted Single Phase Solid State Relay

 

Features

  •  10–75 amps, 330Vac max

  •  50–75 amps, 660Vac max

  •  Single phase zero-fired

  •  LED input indicator

  •  Clear safety cover included

  •  Panel mount w/optional heatsink

  •  DC and AC input versions

  •  Superior Surge Survial™ technology

 

RSxA Series Phase DC or AC Logic Inputs

 

Features

  •  50, 75 and 100 Amps, 660Vac max.

  •  Single Phase Zero Cross Fired

  •  Integral heatsink design

  •  LED input and fault indicators

  •  Internal I2t fusing

  •  DC and AC Logic Inputs

RV Series Single Phase DC or AC Logic Inputs


 

Features

  • Superior Surge Survival™ technology
  • Eliminates burden resistors on AC activated circuits
  • Integrated heatsink
  • Mounts on DIN rail or panel
  • Optically isolated
  • L.E.D. indicator
  • Built-in snubber
  • 4000 volt isolation
  • Zero voltage turn-on
  • Direct copper bonded SCRs
  • Super efficient, 1.0 watt dissipated per amp switched
  • U.L. recognized
  • C.S.A. certified
  • C.E. compliance EN 60947
 

Oversized SCRs with
  • 1400 blocking volt (6V)
  • 800 blocking volt (3V)
  • 1000V/µs immunity

 

SVDD Solid State Relay

Features

  •   DC Control Input

  •   Optically Isolated

  •  Wide Control Range

  •  High Surge Ratings

  •  Compatible With Most Logic Systems

  •  1500 Volt RMS Isolation

  •  100% Tested at Rated Current

  •  Fast Switching Times

 
IO Series - DIM Rail Mounted Mini Output modules for low power Heating Applications.
  • Features

  •  3 amps, 12Vac to 280Vac or 5Vdc to 60Vdc

  •  AC or DC inputs

  •  LED logic indicator

  •  Internally fused

  •  Optically isolated

     

Mechanical | Solid State | Mercury

 

 

El Paso Heater & Supply Company

 

1450 BESSEMER DR.

El Paso, TX. 79936

Tel: (915) 595-6565  Fax(915)595-6993

 

Send mail to Sales@elpasoheater.com with questions or comments about this web site.
Copyright © 2005 El Paso Heater & Supply Company
Last modified: 08/24/11
Design: TS COMPUTERS AND WEBDESIGN